2019 Jeep Wrangler Unlimited

Chrysler (FCA US LLC) is recalling certain 2020 Jeep Gladiator and Jeep Cherokee, 2019-2020 Ram 1500 Pickup, Ram 2500 Pickup, Ram 3500 Pickup, Chrysler Pacifica, Dodge Durango, Jeep Grand Cherokee, Jeep Wrangler, and Jeep Renegade and 2019 Dodge Challenger vehicles equipped with 8.4" or 12" radio displays. A software error can cause the rearview camera image to remain displayed after the vehicle has been shifted out of reverse. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 111, "Rearview Mirrors."

Chrysler (FCA US LLC) is recalling certain 2018-2020 Jeep Wrangler and 2020 Gladiator vehicles equipped with manual transmissions. The clutch pressure plate may overheat and fracture.

Chrysler (FCA US LLC) is recalling certain 2019 Jeep Wrangler and 2019 Ram 1500 vehicles. These vehicles have improperly machined steering column stub shafts that may break, possibly causing the steering wheel to detach from the steering column.

Chrysler (FCA US LLC) is recalling certain 2018-2019 Jeep Wrangler vehicles. The front track bar brackets may be improperly welded, which can cause the bracket to separate from the frame, reducing steering capability.

Getting the well know Jeep "Death Wobble". Was advised by Carvana when I bought this vehicle that it had an open recall for this exact issue (Manufacturer Recall Number CDJR XF1) due to the Steering Damper having air in it. However, when I contacted a Jeep dealership to get it fixed, I was told there is no recall for the Steering Damper for my specific vehicle. When I look it up on NHTSA, there isn't a recall listed on here either. Whenever I hit transitions in the pavement while driving above 50mph, I get the death wobble on the front of the vehicle. I have not yet had it repaired, but I plan to do so regardless of whether a recall exists. This is clearly an affected vehicle that was wrongly excluded from the manufacturer's recall for the Steering Damper on vehicles manufactured prior to August 11, 2020. My vehicle was manufactured in April 2019, so it is definitely in the correct date range, and with the exact same issue of others that were recalled. The only reason I have not crashed is because I've taken EVOC classes (for driving firetrucks and ambulances), and I am able to control it when it does happen. There were approximately 65k miles on the vehicle when I bought it, and there is about 72k miles now. It has been happening since I bought it in December 2025 from Carvana.

Incident Sep 1, 2026

The IPC Cluster stopped working and the screen is completely blank. It is unsafe to drive since I don’t know how fast I’m going, how much gas is in the tank, and inability to see any warning lights. The recall for this is Recall Campaign 30B/NHTSA 24-V 652 for jeeps with the 3.5 inch cluster layout, which I have but my VIN is not listed on the recall list. It should be!

Incident Jun 19, 2026

Check engine, ABS, Service Shifter suddenly pops up and the steering was hard to turn almost had an accident

Incident Aug 16, 2026

The contact owns a 2019 Jeep Wrangler. The contact stated that while driving at an undisclosed speed, the instrument panel was blank. The vehicle was taken to the dealer and was diagnosed with instrument cluster failure. The contact was informed that the instrument cluster needed to be replaced. The vehicle was awaiting the repair. The manufacturer was notified of the failure and referenced NHTSA Campaign Number: 24V652000 (Electrical System); however, the VIN was not included in the recall. The failure mileage was unknown.

Incident Aug 17, 2026

The 3.5-inch Instrument Panel Cluster went completely black while operating the vehicle, causing a total loss of speedometer and critical safety indicators (violating FMVSS 101). Concurrently, the engine computer limited vehicle performance to 3,000 RPM (limp mode). The vehicle exhibits the exact failure mode detailed in NHTSA Campaign 24V-652 (Jeep Recall 30B), but the manufacturer has not yet added this VIN to the recall population.

Incident Apr 7, 2026

ABS pump and module combination is making brake calipers to not released. It’s been two times in 6 months my brakes are used up and calipers locked. Jeep knows this issue across its brand of vehicles but not called for a recall. Parts are also in back order that says lot of vehicles has issues. Confirmed with local dealership.

Incident Jul 29, 2026

VEHICLE & INCIDENT: 2019 Jeep Wrangler JL 2.0L Turbo. While climbing an extended grade on Hwy 87, vehicle experienced a sudden sluggish throttle anomaly and rapid coolant temperature spike from ~215F to 255F under load. Vehicle was pulled off and shut down within ~20 seconds. SUSPECTED FAILURE MODE & UNDERHOOD FIRE: Upon opening the hood, pressurized coolant had sprayed across the engine bay from a split in the smaller rubber hose branch of the engine coolant outlet assembly (Mopar PN 68280797AC). The hose split longitudinally ~13mm with the center ~32mm from the hose end. The vehicle is equipped with a Baja Designs T-Fitting to replace 68280784A The hot, pressurized coolant sprayed directly onto the exposed, center section of the turbocharger between the compressor and turbine sections and on the turbine section itself. The coolant is suspected to have flash-ignited on contact with the turbo, creating an active under hood fire that began spreading to the hood insulation liner. The fire was successfully doused roadside with water, preventing a total vehicle burn-down. No other fuel sources were noted and the lines to the turbocharger were intact and did not show evidence of a leak. SAFETY CONCERN / HAZARD FOR NHTSA: 1. FIRE HAZARD: Pressurized factory coolant hoses and plastic junctions on the 2.0T GMET4 are routed in close proximity to the unshielded turbine housing. A hose rupture under normal grade-climbing thermal loads results in high-pressure atomized coolant hitting an ignition source well above its auto-ignition point. 2. COMPONENT DEGRADATION: Rubber lines near the engine outlet appear susceptible to heat-fatigue failure under high ambient/high load conditions, posing a sudden fire hazard at highway speeds. REPAIR: Roadside trim/re-clamp of the split hose allowed temporary transit. Replacing full hose assembly (68280797AC), upgrading radiator lines, and performing a full OAT coolant flush/vacuum refill. No oil contamination was noted after the incident.

Incident Aug 8, 2026

The vehicle is experiencing severe, premature galvanic corrosion on the doors, hinges, and hood due to a documented factory defect where aluminum panels press directly against steel hinges without proper isolation (acknowledged by the manufacturer in TSB 31-001-24).This is a critical structural and safety hazard covered under Federal Motor Vehicle Safety Standard (FMVSS) 206, which regulates door locks and door retention components. The advanced sub-surface corrosion is causing the metal surrounding the door hinges to degrade and oxidize, causing the paint to blister, bubble, and flake off. Over time, this structural failure poses an imminent safety risk of causing the door hinges to seize or bind, potentially jamming the doors shut during an emergency and trapping occupants inside the vehicle. Furthermore, the degradation of these hinge components creates a severe risk of the doors failing and opening unexpectedly while the vehicle is in motion at highway speeds.The manufacturer is refusing to address this structural defect because the vehicle passed its 5-year calendar warranty window, ignoring the fact that this sub-surface chemical reaction takes years to visibly manifest. This defect requires a formal safety investigation and an expanded recall to protect drivers from door-retention failures.

Incident Jul 18, 2026

The contact owns a 2019 Jeep Wrangler. While the contact's daughter was driving at an undisclosed speed, the heated steering wheel feature was enabled; however, the heated steering wheel feature failed to function as intended. In addition, the contact became aware of a burning odor. The contact deactivated the heated steering wheel feature. The vehicle was taken to the dealer, where it was diagnosed with interior melting of the steering wheel. The contact was informed that the steering wheel and the steering wheel housing needed to be replaced. The vehicle was not repaired. The contact was informed that the parts were ordered. The contact referenced an unknown recall; however, the VIN was not associated with a recall related to the failure. The manufacturer was made aware of the failure but provided no assistance. The contact was advised to contact the NHTSA Hotline and report the failure. The failure mileage was approximately 71,663.

Incident Nov 11, 2025

The contact owns a 2019 Jeep Wrangler. The contact stated that while driving approximately 60 MPH, the vehicle suddenly lost motive power and stalled, and the vehicle went into LIMP Mode. The check engine warning light was illuminated. The driver was able to safely move the vehicle to the side of the road. The vehicle was taken to an independent mechanic to be diagnosed, and the contact was informed that the ABS module had failed. The local dealer was contacted and advised that the replacement part was on backorder and referred the contact to the manufacturer for assistance. The vehicle was not diagnosed or repaired. The manufacturer was contacted and confirmed that the replacement part was not available. The failure mileage was approximately 68,482.

Incident Jun 7, 2026

The front left (drivers side) caliper stuck and the the brake line needs replaced. The caliper sticking was causing extreme heat that could have caused a fire as well as brake failure. The repair shop confirmed that the parts need replaced. No warning messages were ever appear. Additionally, the left brake line from Mopar is not available and there are almost a 1000 on back order. The Jeep is not drivable and no parts available for the foreseeable future to fix the problem.

Incident Jul 16, 2026

Instrument panel cluster has malfunctioned. Spedometer, tachometer, odometer, fuel guage, oil temperature, tire pressuer, and several other dashboard displays both analog and digital are not functional. The instruments on the dashboard have gone blank and do not provide a reading when the car is powered on. As a consequence of the instrument panel cluster failure, I am unable to see my exact speed, potential vehicle warning indications, and fuel levels while operating the vehicle putting the safety of myself and others at risk. The vehichle has a history of dealership and mechanic inspections. No warning lamps, messages, or other symptoms were evident prior to the failure of the instrument panel cluster.

Incident Jul 15, 2026

Instrument panel cluster failing making it difficult to determine mph, fuel in vehicle, mileage, etc. panel was flashing and blacking out while driving creating a distraction, photos could not be obtained during worst of incident because actively driving.

Incident Jul 5, 2026

There was a recall done on the clutch system back in 2023 and now the same problem has occurred, and I have to replace my entire clutch system.

Incident Jul 2, 2026

Instrument panel cluster failure in my 2019 jeep wrangler unlimted sport. instrument panel cluster +9 Stellantis (Jeep) recalled certain 2019 Jeep Wranglers (Campaign 24V-652 or Recall #30B) because their 3.5-inch instrument panel clusters can short-circuit and go completely dark. This causes you to lose your speedometer and critical warning lights, increasing crash risks. Dealers replacement . Thing is none of all 4 are honoring this recall. Im having the same issues as this recall. FCA, NHTSA, CHRYSLER/JEEP, STELLANTIS. ALL 4 i have called even made a complaint and all i get is so rry cant help you cause my vin number is not on the recall yet having the same recall issues. And i have to drive back to [XXX] tomorrow from [XXX] i pray that i dont get into any accident INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

Incident May 20, 2026

The contact owns a 2019 Jeep Wrangler. The contact stated that while driving at an undisclosed speed, the vehicle stalled. The contact pulled over and waited for several minutes before restarting the vehicle. The vehicle was taken to the dealer, who replaced the wiring harness, but the failure persisted with the speedometer and fuel gauge fluctuating and the instrument panel icons flashing. Additionally, the vehicle was jerking and experienced a loss of power steering assist while driving. The vehicle was jumpstarted. The vehicle was taken back to the dealer; however, the vehicle was not yet diagnosed or repaired. The contact related the failure to NHTSA Campaign Number: 24V652000 (Electrical System); however, the VIN was not included in the recall. The manufacturer was not made aware of the failure. The failure mileage was approximately 82,000.

Incident Mar 1, 2026

The contact owns a 2019 Jeep Wrangler. The contact stated that the horn was inoperable. The contact attempted to depress the horn on several occasions, but the horn failed to operate. The contact's husband attempted to depress the horn, and the horn failed to operate. There were no warning lights illuminated. The local dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was not contacted. The failure mileage was approximately 50,000.

Incident Jun 1, 2026

The contact owns a 2019 Jeep Wrangler. The contact stated that while driving at an undisclosed speed, the Check Engine warning light illuminated. The vehicle was taken to O'Reily's, where a portable diagnostic machine was used; however, no fault codes were retrieved. The contact stated that the check engine warning light was an old warning light. In addition, the contact was informed that the vehicle could be driven. The contact stated that while driving to the residence, the check engine warning light turned off. The failure reoccurred, and the engine seized. The contact stated that the vehicle rolled near the shoulder of the road. The contact became aware of smoke coming from the engine compartment. The contact stated that a good Samaritan stopped and assisted the contact. The contact and a good Samaritan became aware of fire coming from the engine compartment near the battery. The good Samaritan attempted to extinguish the fire with a sweatshirt, then used a jug of water from inside the vehicle. No injuries were sustained. The vehicle was towed to the local tow yard. The Carvana dealer where the vehicle was purchased was made aware of the failure. The vehicle was then towed to a repair shop assigned by Carvana. The vehicle was not diagnosed or repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 65,000.

Incident Jun 13, 2026

The 48V eTorque Power Pack Unit (PPU), BPCM, and associated cables failed on my 2019 Jeep Wrangler, causing the vehicle to stall and lose all acceleration while driving on the highway. All components are available for inspection upon request. In June 2025, a non-Jeep service center identified stored diagnostic code P0A9C-00 (48V hybrid battery temperature sensor circuit performance failure) along with multiple low voltage codes in the power steering system. The technician noted the issue needed to be addressed by an authorized Jeep dealer, as there was insufficient information to perform a repair on the 48V hybrid system. In September 2025, while driving on the highway, the engine stalled and the vehicle completely lost acceleration and would not restart. The vehicle required towing to an authorized Jeep dealer. A sudden and unexpected loss of acceleration and engine stall on a highway creates an extreme risk of rear-end collision and potential serious injury or fatality to the driver and other motorists. The problem was confirmed by an authorized FCA/Jeep dealer who found the same diagnostic code P0A9C-00, along with corrosion buildup on the 48V connector pins and BPCM pins. Two separate FCA STAR cases were opened by the dealer. The Power Pack Unit Battery was identified as the failed component. The dealer confirmed that the 48V cables required for repair are currently unavailable through Chrysler under any parts specifier, meaning FCA cannot supply the necessary parts to remedy this known defect. The vehicle has been inspected by an authorized FCA dealer on two separate occasions nine months apart, with the defect remaining unresolved on both visits due to FCA parts unavailability. Warning symptoms including low voltage codes and the P0A9C-00 fault code were first identified in June 2025, approximately three months before the highway stall event, indicating this was a progressive and worsening defect. The issue was first reported in June 2025 and remains unrepair

Incident Sep 3, 2025

Went to start the jeep and the entire dash cluster was out. I had just gotten it serviced 2 days before it went out and there was no warning or indication that the cluster panel was damaged. Due to this issue I’m unable to see any speed, gas levels, signaling, oil level and any other signal indicators from the dash. This is extremely problematic and renders the vehicle unsafe to drive. It was inspected by the dealership and another mechanic and both parties confirmed the dash cluster was broken and needed to be replaced and that several other 2019-2020 jeep wranglers had been brought in with the same problem.

Incident May 1, 2026

3 calipers seized at the same time. Replaced all 3. After leaving the mechanic my front passenger seized again, went back to the mechanic & they re did the caliper. A week later the front passenger seized again. They replaced the hose (hose was clamped) 3 days later the front passenger hose clamped again causing the caliper to seize.

Incident Feb 20, 2026

In June 2025, I had the clutch recall (NHTSA 23V-116) performed on my 2019 Jeep Wrangler at AutoNation Jeep Southwest in Littleton Colorado. Prior to this recall repair, the vehicle had no transmission faults or warning lights. Following the recall work, I began experiencing a recurring 'Service Transmission' warning. On a return visit, the dealership discovered they had incorrectly reinstalled the shifter cables during the recall repair, making it difficult to shift into first gear. The cables were redone. The 'Service Transmission' warning continued after the cable rework. The dealership performed a software flash on a subsequent visit, which did not resolve the issue. The vehicle later experienced a 'Service Transmission' warning accompanied by a clutch overheat alert and limp mode activation. The dealership has since diagnosed fault codes P082C and P082F (gear lever position sensor circuit high) and is recommending a transmission range sensor replacement at my expense. The dealership has acknowledged they cannot confirm the root cause of these codes. When I contacted Jeep Customer Care, they called the dealership and accepted their assessment that the issue is unrelated to the recall repair. I believe the ongoing fault codes are a direct result of the defective recall remedy, specifically the incorrect shifter cable installation and subsequent cable disturbance during rework. I am requesting NHTSA investigate whether the recall remedy as performed at this dealership is defective.

Incident May 20, 2026

Stellantis FCA should be required to extend paint warranty due to bubbling on hood and hinges. There is a known issue but needs to expand out to layer model years. My vehicle has never been in an accident and if was a few months newer Stellantis would’ve covered an 8200$ repair. Hood hinge paint replacement

Incident Jun 1, 2026

My speedometer blacked out couldnt see the fuel gage or speedometer. Light flickering, auto park engages, steering wheel locks up.

Incident Jun 6, 2026

The center cluster instrument panel went completely black. This affects seeing any warning lights, tire pressure, speedometer, mileage, fuel amount, etc. The problem has been confirmed by auto shops. No way to fix except replacing the entire thing and my VIN has not been included in any recalls.

Incident Feb 1, 2026

The contact owns a 2019 Jeep Wrangler. The contact stated that while driving at an undisclosed speed, the instrument panel became inoperable. The contact stated that the instrument cluster began to dim and subsequently went completely blank. The dealer was contacted. The vehicle was not diagnosed or repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 112,000.

Incident May 11, 2026

What component or system failed or malfunctioned, and is it available for inspection upon request? After diagnostics of multiple 'no communication' codes, it was determined that the CAN buss star connector was faulty. The part has been replaced, but is available for inspection. How was your safety or the safety of others put at risk? The malfunction caused repeated warning lights and loss of steering at unpredictable times. Luckily I was always able to put on my hazard lights and get out of the path of traffic. Has the problem been reproduced or confirmed by a dealer or independent service center? Yes Has the vehicle or component been inspected by the manufacturer, police, insurance representatives or others? No Were there any warning lamps, messages or other symptoms of the problem prior to the failure, and when did they first appear? Yes, a variety of warning lamps and messages over a period of 10-12 days, which would disappear after restarting the vehicle (restarting was necessary to get the steering working again). Messages such as traction control, auto on/off, and check engine light were a few different ones. They came and went so quickly it was hard to catch them all while I was focused on getting safely off the road.

Incident Apr 25, 2026

heated steering wheel connector melted inside sccm. Repairs needed are a new wiring harness and sccm. Vehicle went up in smoke

Incident May 1, 2026

Jeep engine stopped running while driving on high way 20.Had to coast to stop in middle of side street.Jeep did start back up but would not go into drive until an hour of trying to get it into gear.Drove it home.Next morning I started jeep but would not go into drive.It was stuck in park.

Incident Apr 25, 2026

I was driving my 2019 Jeep Wrangler Unlimited Sahara 2.0T/AT to the gym with my spouse. No Check Engine Light, Jeep Temps were perfect. All gauges operated as it should, so there was no sign of trouble. The vehicle was OFF. We parked and walked into the gym and then into the 1 set of exercises, Someone yelled in the gym that someone's truck was on fire. We ran outside and Lo and Behold it was our Jeep. The Engine Compartment Was totally Destroyed. Please Look At the Pictures for Reference.

Incident Apr 16, 2026

The contact owns a 2019 Jeep Wrangler. The contact stated that while starting the vehicle, the instrument panel became inoperable, turning on and then shutting off. The contact stated that while driving, the instrument panel was blank. The vehicle was taken to the dealer, where it was diagnosed, and it was determined that the instrument cluster had failed and needed to be replaced. The vehicle was repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 103,000.

Incident Apr 17, 2026

See attached document for complaint.

Incident Mar 9, 2026

Instrument panel cluster dashboard failure, found a massive recall online for Wranglers 2018-2024 for this issue, called dealer who informed us our VIN was not under this recall, but we have a Wranger 2019 with the same issue so should definitely qualify. Called JEEP who informed us our VIN was not under this recall and they won’t do anything about it. This issue is deemed a SAFETY HAZZARD per recall, and we do qualify but they say our VIN specifically does not. This has to be illegal as well as unsafe. Unable to see mileage, gas, safety alerts, etc. because of outage.

Incident Mar 14, 2026

RE: Safety Concern – Instrument Cluster Failure Consistent with NHTSA Recall 24V-652 Dear Sir or Madam: Regarding our 2019 jeep wrangler vin# Milage of 74602.9 on 3-22-26 We are writing to report a safety-related defect involving a 2019 Jeep vehicle exhibiting instrument cluster malfunction consistent with conditions described in NHTSA Recall No. 24V-652 (FCA US LLC). Although this vehicle is not currently included within the recall’s identified VIN population, it is exhibiting substantially similar symptoms, including: Intermittent loss of speedometer function Tachometer irregularities Intermittent or complete failure of the instrument cluster display Recall 24V-652 identifies a defect in the instrument panel cluster (IPC) which may result in loss of critical driver information. As recognized by the National Highway Traffic Safety Administration, such failures may increase the risk of a crash due to the driver’s inability to accurately monitor vehicle speed and operating conditions. Given the similarity between the observed condition and the defect described in the recall, this raises a concern that the issue may extend beyond the currently defined VIN range. Accordingly, we request: A formal review of this vehicle for potential inclusion within Recall 24V-652 or any related service campaign; and Appropriate corrective action consistent with applicable safety and warranty obligations. We will also be submitting this matter to the National Highway Traffic Safety Administration (NHTSA) for further review. Please advise regarding next steps. Nothing in this correspondence shall be construed as a waiver of any rights or remedies, all of which are expressly reserved. Sincerely,

Incident Mar 19, 2026

Engine lights on Glass Recalibration failed multiple times. Engine failure when Jeep comes to a complete stop vehicle totally shuts down and needs to be restarted. When manufacture was contacted: not able to sell new engine. Resolution used engine with same issue. No real Resolution.

Incident May 2, 2025

The contact owns a 2019 Jeep Wrangler. The contact stated that while driving at an undisclosed speed, there was a misfire coming from the engine, and there was a backfire coming from the exhaust system. Additionally, there was a coolant intrusion in cylinder #3 and a burning in the head gasket. The contact stated that the engine overheated and the vehicle failed to restart after it was turned off. The catastrophic engine failure was attributed to coolant intrusion into the combustion chamber, which caused severe internal damage. The vehicle was towed to an independent mechanic, where the engine was being replaced. The vehicle was not yet repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 61,000.

Incident Jan 1, 2026

Jeep Wranglers in the older/early models had aluminum steering steering boxes that would have excessive play do to thermal expansion. Jeep never made it recall but did provide a TSB NUMBER: 08-074-20 REV. B GROUP: 08- Electrical DATE: September 26, 2020. The TSB would recommend the aluminum steering box be replaced with a steel one. The issue is that many dealers refused to do the fix/change parts for free under or out of warranty. Its clearly an issue as later/newer models of the Jeep JL Wrangler started shipping with the steel steering box.

Incident Jul 31, 2024

The contact owns a 2019 Jeep Wrangler. The contact stated that while driving approximately 50 MPH, the contact experienced the death wobble, and the vehicle started shaking violently. There was no warning light illuminated. The driver was able to maintain control of the vehicle; however, the vehicle failed to exceed 50 MPH without the failure recurring. The vehicle was taken to an independent mechanic, where it was diagnosed and determined that the track bar had failed and needed to be replaced. The vehicle was not repaired. The vehicle was also taken to the dealer, where it was determined that the track bar had failed and needed to be replaced. The vehicle was not repaired. The manufacturer was not made aware of the failure. The approximate failure mileage was 84,000.

Incident Mar 3, 2026

Since new Jeep has experienced "excess play in the steering" the Jeeps steering "wanders" and vehicle pulls to both the left and right. Steering wandering increases in hot temperatures and at higher speeds and becomes UNSAFE to operate the vehicle. When purchasing new, I noticed the "excess play in the steering", but was told by the Jeep salesperson that "that's how Jeeps drive" and "They do not drive like typical passenger vehicles". I did not take my Jeep in for service for this issue because the salesperson told me that this is how the vehicle is designed to drive. However, I recently found out that Jeep issued a Technical Service Bulletin #08-074-20 REV.B back on September 26, 2020 that addresses this issue of "excess play in the steering" and "wandering" and the TSB gives recommendations to fix the steering by installing a new and improved Steering Gear Box that is made from steel as opposed to aluminum. I took my Jeep into a Jeep dealership with regards to this issue. The Jeep dealership confirmed that I have the "old style" steering gearbox mentioned in Technical Service Bulletin #08-074-20 REV.B and recommended that I replace it with the new design as recommended by the TSB. I asked Jeep to repair by vehicle free of charge as this is a "known" issue on Jeep Wrangler JL 2018-2020 as described in the TSB, but Jeep refused to pay for the safetly modification to my steering, stating that I am "out of the warranty period". This is a KNOWN manufacture defect. Jeep installed inferior aluminum steering gear boxes on their Jeep Wrangler JL 2018-2020 and 2020 Jeep Gladiators and they have since upgraded that critical safety component to a "steel version." Jeep should without question issue a "recall" to fix all current Jeep owners 2018-2020 Wrangler JLs and 2020 Jeep Gladiators that have a faulty aluminum steering gear box and replace it with the upgraded steel version that fixes the "wandering steering" and "excess play in the steering".

Incident Sep 18, 2019

My gauge cluster is having a problem and I dont know why my jeep is covered under the recall when its the same part in every other jeep that is having the same problem? I would really like to know how used can pick one Jeep model and not the others? When all the same parts are in the jeeps

Incident Feb 19, 2026