1997 Mitsubishi Eclipse

1997 Mitsubishi Eclipse 2-DR.

Overall

Not Rated

Front Crash

Not Rated

Side Crash

Not Rated

Rollover

Not Rated

SUSPENSION:FRONT:CONTROL ARM:LOWER BALL JOINT

VEHICLE DESCRIPTION: PASSENGER VEHICLES. IF THE RUBBER BOOTS ON THE LOWER LATERAL ARM BALL JOINTS OF THE FRONT SUSPENSION WERE DAMAGED DURING ASSEMBLY, DIRT AND WATER CAN INTRUDE. ALSO, MMC HAS ADDED THE POTENTIAL OF LEAKING MOISTURE, WHICH CAN CAUSE THE BALL STUD TO CORRODE.

Campaign: 00V421001

POWER TRAIN:AUTOMATIC TRANSMISSION

VEHICLE DESCRIPTION: PASSENGER VEHICLES. LOCKUP OF THE TRANSFER CASE CAN OCCUR DUE TO INSUFFICIENT LUBRICATION.

Campaign: 98V069001

SEATS:FRONT ASSEMBLY:HEAD RESTRAINT

THE HEADREST GUIDE BRACKET WAS IMPROPERLY WELDED TO THE SEAT BACK FRAME ON THE PASSENGER SIDE SEAT BACK ASSEMBLIES ONLY.

Campaign: 97V081001

EXTERIOR LIGHTING

CERTAIN AAI MOTORSPORTS COMBINATION LAMPS SOLD AS REPLACEMENT LAMPS FOR USE ON THE ABOVE LIST PASSENGER VEHICLES. COMBINATION LAMPS NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT."

Campaign: 06E060000

EXTERIOR LIGHTING:HEADLIGHTS

DOPE, INC. IS RECALLING 42,540 COMBINATION CORNER AND BUMPER LAMP ASSEMBLIES OF VARIOUS PART NUMBERS SOLD FOR USE AS AFTERMARKET EQUIPMENT FOR VARIOUS PASSENGER VEHICLES. THESE HEADLAMPS FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THESE LAMPS DO NOT CONTAIN THE REQUIRED AMBER SIDE REFLECTORS.

Campaign: 09E025000

EXTERIOR LIGHTING:HEADLIGHTS

CERTAIN ANZO COMBINATION HEADLAMP ASSEMBLIES SOLD AS REPLACEMENT LAMPS FOR USE ON CERTAIN PASSENGER VEHICLES. SOME COMBINATION LAMPS ARE NOT EQUIPPED WITH AMBER SIDE REFLECTORS WHICH FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT."

Campaign: 06E023000

EXTERIOR LIGHTING

SABERSPORT IS RECALLING 16,270 COMBINATION CORNER AND BUMPER LAMP ASSEMBLIES OF VARIOUS PART NUMBERS SOLD FOR USE AS AFTERMARKET EQUIPMENT FOR VARIOUS PASSENGER VEHICLES. THESE HEADLAMPS FAIL TO CONFORM TO THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, "LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT." THESE LAMPS DO NOT CONTAIN THE REQUIRED AMBER SIDE REFLECTORS.

Campaign: 09E012000

EXTERIOR LIGHTING

CERTAIN TRADESONIC COMBINATION LAMPS SOLD AS REPLACEMENT LAMPS FOR USE ON THE ABOVE LISTED PASSENGER VEHICLES. COMBINATION LAMPS NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT.

Campaign: 06E064000

EXTERIOR LIGHTING

CERTAIN CK MOTORSPORTS COMBINATION HEADLIGHTS, CLEAR CORNER, BUMPER, AND SIDE MARKER LIGHTS SOLD AS REPLACEMENT LAMPS FOR USE ON THE PASSENGER VEHICLES LISTED ABOVE. SOME COMBINATION LAMPS THAT ARE NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT.

Campaign: 06E049000

FUEL SYSTEM, GASOLINE:DELIVERY:FUEL PUMP

CERTAIN AIRTEX FUEL PUMP MODULE ASSEMBLIES, P/N E7081H, SOLD FOR USE AS REPLACEMENT EQUIPMENT FOR THE VEHICLES LISTED ABOVE. THE WALL OF THE FLARED FITTING OF THE FUEL PUMP IS NOT THICK ENOUGH TO PREVENT THE MATING THREADED FITTINGS FROM BOTTOMING OUT BEFORE AN ADEQUATE SEAL IS ACHIEVED. THIS CONDITION MAY RESULT IN LEAKAGE OF FUEL AT THE CONNECTION OF THE VEHICLE FUEL LINE AND THE FUEL PUMP MODULE ASSEMBLY.

Campaign: 07E055000

EXTERIOR LIGHTING

CERTAIN PRO-A MOTORS CORNER LAMPS, TURN SIGNALS, AND HEADLIGHTS SOLD AS REPLACEMENT LAMPS FOR USE ON CERTAIN PASSENGER VEHICLES LISTED ABOVE. SOME COMBINATION LAMPS THAT ARE NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT.

Campaign: 06E026000

EXTERIOR LIGHTING

CERTAIN J & A AUTO ACCESSORIES COMBINATION HEADLAMPS SOLD AS REPLACEMENT LAMPS FOR USE ON THE ABOVE LISTED PASSENGER VEHICLES. SOME COMBINATION LAMPS THAT ARE NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT.

Campaign: 06E044000

AIR BAGS

The airbag cover on the passenger side is peeling off. I feel that if I tried to glue it or modify it in any way, this action could result in the airbag not deploying like it should and cause serious injury incase of an accident.

SUSPENSION

THIS VEHICLE HAS A RECALL FOR THE LOWER BALL JOINT. AFTER CALLING TO SET UP AN APPOINTMENT TO FIX THIS ISSUE THE VEHICLE SHOWS UP AS ALREADY SERVICED, WHICH MAY HAVE ONLY BEEN AS LITTLE AS AN INSPECTION THAT WAS DONE. THE BALL JOINT IN THIS VEHICLE IS CURRENTLY FAILING AND IS EXTREMELY NOTICEABLE WHILE DRIVING. I AM IN SEARCH OF A RECORD FOR WHO FILED THE SERVICE FOR THIS RECALL OR A CONFIRMATION THAT THIS ISSUE CAN BE "FIXED" ONCE AGAIN UNDER THE SAME RECALL.

SUSPENSION

I NEVER RECEIVED A RECALL ALERT FROM THE DEALER. RIGHT NOW THE DEALER WAS SOLD TO A NEW OWNER. I WENT TO THE DEALER TO BUY A FENDER AND MY VIN NUMBER DOES NOT APPEAR IN THE MITSUBISHI COMPUTER SYSTEM HERE IN PUERTO RICO EITHER IN USA. SO I WOULD LIKE AN ADVISE. WHAT I HAVE TO DO. I HAVE ALL THE PURCHASING PAPER FROM THE DEALER AND THE BANK. A LONG TIME AGO I HAVE PROBLEM WITH THE ARM BALL JOINTS BUT I PAID FOR THE REPAIR IN A MECHANIC WORKSHOP. *TR

SUSPENSION

TL* THE CONTACT OWNS A 1997 MITSUBISHI ECLIPSE. WHILE DRIVING AT ANY SPEED, THE FRONT END OF THE VEHICLE VIBRATED AND VEERED TO THE RIGHT. THE VEHICLE WAS NOT DIAGNOSED. THE VEHICLE WAS REPAIRED UNDER A RECALL IN 2010, BUT WAS NOT REPAIRED AGAIN. THE VIN WAS INVALID. THE APPROXIMATE FAILURE MILEAGE WAS 170,000.

POWER TRAIN

MY CAR IS A 1997 ECLIPSE SPYDER AUTOMATIC TRANNY 2.4L . THERE WAS ISSUES WITH THE TRANSMISSION IT WAS ON LEAN MODE, LOCKED ON 2ND GEAR AND IT COULD ONLY GO UP TO 40 MILES PER HR OTHER WISE THE RPM WERE VERY HIGH... *TR

TIRES

TIRE TREAD SEPARATION ON PASSENGER CAR TIRES. BRAND = KUMHO LINE = ECSTA ASX SIZE = 225/40/R18 DOT # = YOMX YC2F WHILE DRIVING DOWN THE ROAD, MY SON NOTICED RUBBER CHUNKS FLYING FROM THE FRONT END OF HIS CAR. WHEN HE STOPPED TO CHECK THINGS OVER, HE FOUND THAT THE TREAD OF ONE OF THE FRONT TIRES WAS SEPARATING RIGHT DOWN TO THE BASE CORDS OF THE TIRE. THE SEPARATION OCCURRED ON JUST ONE EDGE OF THE TREAD AND WAS BEING UN-SPOOLED FROM THE TIRE. I AM REPORTING THIS SO THAT IT MAY BE DOCUMENTED FOR FUTURE REFERENCE IN THE NHTSA DATABASE. *TR

AIR BAGS

SON DRIVING A ECLIPSE RAN OFF THE ROAD AND HIT A TREE GOING 55 MPH AND THE AIR BAGS NEVER CAME OUT RESULTING IN THE DEATH OF ONLY CHILD. *TR

POWER TRAIN

TL*THE CONTACT OWNS 1997 MITSUBISHI ECLIPSE. SINCE PURCHASING THE VEHICLE IN 1997, THE VEHICLE'S SPEED HAS NOT EXCEEDED 35MPH. ON THREE OCCASIONS, A MECHANIC ADJUSTED THE TRANSMISSION TIMING; HOWEVER, THE FAILURE CONTINUED TO OCCUR. THE INSURANCE COMPANY STATED THAT IT WAS BEST TO CRASH THE VEHICLE SINCE THE COST FOR A NEW TRANSMISSION WAS EQUIVALENT TO A NEW VEHICLE. THE FAILURE MILEAGE WAS 90,000 AND THE CURRENT MILEAGE WAS 100,000.

EXTERIOR LIGHTING

TL*THE CONTACT OWNS A 1997 MITSUBISHI ECLIPSE. WHILE MAKING A RIGHT TURN AT 30 MPH, THE TURN SIGNAL BECAME STUCK. THE CONTACT TURNED OFF AND RESTARTED THE VEHICLE, BUT THE TURN SIGNAL WAS STILL STUCK. THE DEALER STATED THAT A NEW TURN SIGNAL SWITCH NEEDED TO BE PURCHASED. THE CURRENT AND FAILURE MILEAGES WERE 151,475.

STRUCTURE

PAINT JOB DEFECTS. I HAVE OWNED SEVERAL MITSUBISHIS VEHICLES IN MY FAMILY. ALL RESULTING IN PAINT DEFECTS ON THE CAR. ONLY ONE HAS NOT, DEALERSHIP SAID BECAUSE THERE IS A DEFECT AND THAT ONE VEHICLE NOT AFFECTED WAS MADE AND PAINTED IN JAPAN. COST OF REPAINT OF VEHICLE IS $1500 TO $2500 DEPENDING ON WHERE YOU GO. *TR