2007 Mitsubishi Eclipse
Safety ratings, recalls, and consumer complaints from NHTSA
NHTSA Safety Ratings
2007 Mitsubishi Eclipse 2-DR w/SAB
- Overall
- Not Rated
- Front Crash
- Not Rated
- Side Crash
- Not Rated
- Rollover
- Not Rated
Recalls(4)
SERVICE BRAKES, HYDRAULIC:ANTILOCK/TRACTION CONTROL/ELECTRONIC LIMITED SLIP:CONTROL UNIT/MODULE
Mitsubishi Motors North America, Inc. (MMNA) is recalling certain model year 2006-2009 Eclipse vehicles manufactured April 20, 2005, to February 13, 2009, and 2007-2009 Eclipse Spyder vehicles manufactured December 23, 2005, to February 13, 2009. Due to corrosion inside the antil-lock brake system (ABS) unit, one or more of the internal valves may seize. In a braking event that uses the ABS, a seized valve would increase brake pedal travel and reduce braking ability.
Campaign: 15V337000
FUEL SYSTEM, GASOLINE:STORAGE:TANK ASSEMBLY
MITSUBISHI IS RECALLING 45,988 MY 2005-2007 ENDEAVOR, GALANT, ECLIPSE COUPE, AND MY 2007 ECLIPSE SPYDER VEHICLES. THE BRACKET THAT IS THE ATTACHMENT POINT FOR THE LEFT REAR FUEL TANK MOUNTING STRAP MAY HAVE BEEN IMPROPERLY FORMED DURING A METAL STAMPING PROCESS. THE PROCESS MAY HAVE CAUSED THE METAL TO HAVE A SPLIT IN THE AREA WHERE THE BOLT THAT HOLDS ONE OF THE TWO FUEL TANK STRAPS TO THE UNDERSIDE OF THE VEHICLE IS LOCATED. IN THE EVENT THE FUEL TANK IS FULL AND THE VEHICLE IS SUBJECT TO A SEVERE COLLISION, THE BRACKET MAY BREAK AND ALLOW THE FUEL TANK TO DROP DOWN, POSSIBLY CAUSING A FUEL LEAK.
Campaign: 08V454000
STRUCTURE:FRAME AND MEMBERS
ON CERTAIN PASSENGER VEHICLES, THE METAL FORMING PART OF THE FRONT CROSSMEMBER MAY HAVE BEEN IMPROPERLY STAMPED RESULTING IN THE METAL BECOMING THINNER IN THE CROSS-SECTION THAN SPECIFIED. THIS COULD, OVER TIME, RESULT IN BREAKAGE OF THE CROSSMEMBER.
Campaign: 06V334000
POWER TRAIN:AUTOMATIC TRANSMISSION
ON CERTAIN VEHICLES EQUIPPED WITH AUTOMATIC TRANSMISSIONS, THE KEY LOCK CABLE WAS IMPROPERLY MANUFACTURED AND MAY NOT ALLOW THE CABLE END TO LOCK INTO THE FLOOR SHIFTER MECHANISM. THIS CAN RESULT IN THE INTERLOCK SYSTEM TO BECOME INOPERATIVE AND ALLOW THE IGNITION KEY TO BE REMOVED WITHOUT THE GEARSHIFT MECHANISM BEING PLACED IN THE PARK POSITION.
Campaign: 06V414000
Consumer Complaints(107 total, showing 10)
SERVICE BRAKES
With my vehicle the brakes go straight to the floor. I took it to the mitsubishi dealership closest to me (Bobmills mitsubishi Jacksonville Nc). When I got there i told them what was going on, and if you bleed the brakes they worked fine for 3 or 4 days but after that the brakes would just go to the floor again. They said they bleed the brakes to replace the fluid and then tested the ABS module for a recall and said it was fine but I had a collapsed brake line in the rear. I replaced all the brake lines on the vehicle and did a complete bleed again to remove any air. The brakes now go all the way to the floor again. I was trying to bleed them just to see if I could get some pressure, but 3 of the lines aren't getting pressure. I decided to check and bleed at the master cylinder, I had plenty of pressure coming out so I know that's good. Then I checked the bleed pressure at the ABS module thats on the recall and I am only getting pressure from the drivers front tire, the other 3 are not giving pressure at all, even if you pump the brakes while they are open. So I know the cylinders in that ABS module are bad. So I called the dealership again and they are refusing to do it because they said they don't work on vehicles that old.
ELECTRICAL SYSTEM
Warning lights turn on then automatically turn off while driving
SERVICE BRAKES
Brakes consistently fail to hold pressure and are letting go. I purchased this car back in April and the previous owner had no idea of the recall. Did a bit of research and found it's a defect in the system. Once the car fails to hold pressure I have to very rapidly spam the break pedal to get a sliver of pressure so my car can come to a stop. Breaking with little pressure grinds the brakes and doesn't stop the car.
UNKNOWN OR OTHER
UNKNOWN. I received something from the Mitsubishi company in the mail, but did not reply to them because multiple people told me those are scam related. I never had anything checked, and not sure if I have an issue.
SERVICE BRAKES
Dearler did not fix the ABS, only replaced brake fluid. ABS still fails. went back to Mitsubishi and they said they couldnt help me.
SERVICE BRAKES
VEHICLE IS FOR SALE SITTING ON NAPLETON HYUNDAI OF CARMEL'S USED CAR LOT, 4200 EAST 96TH STREET INDIANAPOLIS,IN 46240. I JUST PAID FOR AND SIGNED PAPERWORK FOR AN 2007 MITSUBISHI ECLIPSE SE, I HAVEN'T TAKEN OWNERSHIP AS FAR A DRIVING IT OFF LOT AFTER PAY/SIGN. CAR FAX WAS SHOWN TO ME B4 SIGNING, IT'S BEEN 2 DAYS AND I HAVEN'T TAKEN OFF LOT YET (FRONT D SIDE CALIPER BRACKET SLIDE/GLIDE PINS ARE SEIZED UP, BRAKE PADS LOCKED ONTO ROTOR. I WILL NOT DRIVE CAR UNTIL DEALER COMPLETES RECALL. I WAS LIED TO ABOUT A COUPLE THINGS SO I'M GOING TO TRY TO BACK OUT OF PURCHASE, THAT'S WHY THE COMPLAINT, I DON'T WANT TO SEE THEM IGNORE RECALL AND SOMEONE ELSE BUYS CAR AND SOMETHING HORRIBLE HAPPENS!!
SERVICE BRAKES
I HAVE NO BRAKES WHAT SO EVER I HAVE TO PUSH THEM LIKE 10 TIMES BEFORE I HAVE ANY
FUEL/PROPULSION SYSTEM
FUEL LEAKS PROFUSELY WHEN FILLING THE TANK. IT IS IN THE FILLER TUBE NOT THE TANK. IT DRIPS AND PUDDLES UNDER THE CAR INSIDE THE REAR TIRE AND CENTER OF CAR. *TR
POWER TRAIN
TRANSMISSION CASE LEAKAGE BOTH WHILE PARKED AND WHILE DRIVING
SEAT BELTS,SEATS
-SEAT BELTS HAVE BECOME DIFFICULT TO USE (STICKY, HARD)...TO PULL OUT TO CONNECT WITH "SNAP". -PLASTIC BASE (AROUND BOTTOM OF SEAT BY FLOOR) BECAME DISTORTED/WARPED, CAUGHT ON BOTTOM OF SEAT WHEN ADJUSTING AND BROKE.
Decode a 2007 Mitsubishi Eclipse VIN
Enter your 17-character VIN to get complete specs, safety equipment details, and production information.
Open VIN Decoder