Skip to content

Free VIN Decoder

Vehicle data powered by NHTSA.

2008 Toyota Camry

Safety ratings, recalls, and consumer complaints from NHTSA

NHTSA Safety Ratings

2008 Toyota Camry 4-DR. w/SAB

Overall
Not Rated
Front Crash
Not Rated
Side Crash
Not Rated
Rollover
Not Rated

Recalls(8)

SEATS:FRONT ASSEMBLY:SEAT HEATER/COOLER

Southeast Toyota Distributors, LLC (SET) is recalling certain model year 2010-2011 Prius and Corolla, 2009-2011 Venza, 2006-2010 Avalon, 2007-2010 FJ Cruiser, 2005-2011 Sienna and Sequoia, 2006-2011 Tacoma 4x2 and 4x4, Camry, Highlander, Tundra 4x2 and 4x4, and 2007-2011 Rav4 and 4Runner. The affected vehicles may experience compression of the seat cushion which may damage the seat heater wiring.

Campaign: 14V743000

SEATS:FRONT ASSEMBLY:SEAT HEATER/COOLER

Southeast Toyota Distributors, LLC (SET) is recalling certain 2005-2011 4Runner, Highlander, Sequoia, and Sienna, 2005-2010 Avalon and Tundra, 2006-2008 Camry Solara, 2006-2010 Highlander hybrid, 2006-2011 Rav4 and Tacoma, 2007-2010 FJ Cruiser, 2007-2011 Camry hybrid, 2009-2010 Venza, 2010-2012 Prius, 1988-1990 and 2005-2010 Camry, and 1989 and 2009-2010 Corolla vehicles equipped with aftermarket accessory seat heaters with a copper strand heating element. The electrical wiring in the seat heaters may be damaged when the seat cushion is compressed.

Campaign: 16V396000

VISIBILITY:POWER WINDOW DEVICES AND CONTROLS

Toyota is recalling certain model year 2007-2009 Camry, Camry Hybrid, RAV4, Corolla, Corolla Matrix, Tundra, Sequoia, Highlander, Highlander Hybrid, Yaris, Scion xB, Scion xD and Pontiac Vibe vehicles. The power window master switch assemblies in some of these vehicles were built using a less precise process for lubricating the internal components of the switch assemblies. Irregularities in this lubrication process may cause the power window master switch assemblies to malfunction and overheat.

Campaign: 12V491000

VEHICLE SPEED CONTROL:ACCELERATOR PEDAL

TOYOTA IS RECALLING CERTAIN MODEL YEAR 2004-2010 PASSENGER VEHICLES. THE ACCELERATOR PEDAL CAN GET STUCK IN THE WIDE OPEN POSITION DUE TO ITS BEING TRAPPED BY AN UNSECURED OR INCOMPATIBLE DRIVER'S FLOOR MAT.

Campaign: 09V388000

EQUIPMENT:OTHER:LABELS

GULF STATES TOYOTA IS RECALLING CERTAIN MODEL YEAR 2005-2010 VEHICLES FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 110, "TIRE SELECTION AND RIMS." THESE VEHICLES WERE SOLD BETWEEN SEPTEMBER 1, 2005 AND JUNE 2, 2008 WITHOUT THE REQUISITE LOAD CARRYING CAPACITY MODIFICATION LABELS.

Campaign: 10V035000

EQUIPMENT:OTHER:LABELS

SOUTHEAST TOYOTA IS RECALLING CERTAIN MODEL YEAR 2005-2011 PASSENGER VEHICLES FOR FAILING TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 110, "TIRE SELECTION AND RIMS." THESE VEHICLES WERE SOLD WITHOUT THE REQUISITE LOAD CARRYING CAPACITY MODIFICATION LABELS.

Campaign: 10V036000

VEHICLE SPEED CONTROL:ACCELERATOR PEDAL

TOYOTA IS RECALLING CERTAIN MODEL YEAR 2005-2010 AVALON, MODEL YEAR 2007-2010 CAMRY, MODEL YEAR 2009-2010 COROLLA, COROLLA MATRIX, RAV4, MODEL YEAR 2010 HIGHLANDER, MODEL YEAR 2008-2010 SEQUOIA, AND MODEL YEAR 2007-2010 TUNDRA VEHICLES. DUE TO THE MANNER IN WHICH THE FRICTION LEVER INTERACTS WITH THE SLIDING SURFACE OF THE ACCELERATOR PEDAL INSIDE THE PEDAL SENSOR ASSEMBLY, THE SLIDING SURFACE OF THE LEVER MAY BECOME SMOOTH DURING VEHICLE OPERATION. IN THIS CONDITION, IF CONDENSATION OCCURS ON THE SURFACE, AS MAY OCCUR FROM HEATER OPERATION (WITHOUT A/C) WHEN THE PEDAL ASSEMBLY IS COLD, THE FRICTION WHEN THE ACCELERATOR PEDAL IS OPERATED MAY INCREASE, WHICH MAY RESULT IN THE ACCELERATOR PEDAL BECOMING HARDER TO DEPRESS, SLOWER TO RETURN, OR, IN THE WORST CASE, MECHANICALLY STUCK IN A PARTIALLY DEPRESSED POSITION.

Campaign: 10V017000

EQUIPMENT

CERTAIN ALL WEATHER FLOOR MATS (AWFM) SPECIFICALLY SOLD AS AN OPTIONAL ACCESSORY FOR USE ON THE 2007 AND 2008 MODEL YEAR LEXUS ES350 AND TOYOTA CAMRY VEHICLES. THE AWFM INCLUDES TWO GROMMET HOLES AND RETAINING HOOKS (CLIPS) TO SECURE THE MAT TO THE VEHICLE'S CARPET. IF THE AWFM IS NOT SECURED BY ITSELF OR IF IT IS PLACED ON TOP OF AN EXISTING CARPETING FLOOR MAT, THE MAT COULD MOVE FORWARD DURING THE VEHICLE USAGE AND IT MAY INTERFERE WITH THE ACCELERATOR PEDAL.

Campaign: 07E082000

Consumer Complaints(1178 total, showing 10)

UNKNOWN OR OTHER

The dashboard has melted and makes it unsafe and hazardous to drive. The on the front windshield glare, the stickiness of dash board..makes me unsure if the dashboard will hold up or eventually collapse. This is clearly a manufacturing issue that needs to be remedied.

STRUCTURE

The contact owns a 2008 Toyota Camry. The contact received a warranty-enhanced program related to the dashboard. The vehicle was taken to a dealer where the repair was performed, but the vehicle experienced the failure approximately two years later. The contact stated that while driving on several occasions, a sticky film on the dashboard created a glare, obstructing the driver's vision of the driver. On one occasion, while attempting to lower the sun visor, the contact’s left arm got stuck on the dashboard, and force was needed to remove the arm from the dashboard. The contact’s arm was burning after being removed from the dashboard, and there were marks on the left arm. The contact used burn ointment on the arm, but no medical attention was needed. The manufacturer was notified of the failure. The failure mileage was approximately 100,000.

UNKNOWN OR OTHER

Melting Dash, sticky to touch

STRUCTURE,UNKNOWN OR OTHER,VISIBILITY/WIPER

The dashboard in my 2008 Toyota Camry LE has deteriorated over time and has melted, becoming sticky and glossy. This condition causes sunlight to reflect off the dashboard onto the windshield, creating a strong glare. This glare significantly impairs my visibility while driving, especially in bright daylight conditions. At times, I am unable to clearly see traffic, road conditions, or other vehicles. This creates a dangerous situation and increases the risk of a crash. The issue has progressively worsened over time. There were no warning messages or indicators prior to this condition developing. The problem appears to be caused by the dashboard material degrading under normal use and heat exposure. I reported this issue to Toyota dealers, including Fremont Toyota and Milpitas Toyota, but no corrective action was taken. The condition remains unresolved. The defective dashboard is available for inspection upon request. This issue represents a safety hazard due to reduced driver visibility.

UNKNOWN OR OTHER

The dashboard hasbeen cracking for some time. I have use leather oils & other products to reduce. has slowly worsened

STEERING,ELECTRICAL SYSTEM,TRACTION CONTROL SYSTEM

The contact owns a 2008 Toyota Camry. The contact stated that while starting the vehicle, the Power Steering, Service Vehicle, Traction Control, and ABS warning lights illuminated, and the speedometer failed to display the speed. The vehicle was taken to the dealer, who diagnosed that the sensors for the front wheels had failed. The contact purchased and replaced the sensors; however, the failure persisted. The manufacturer was informed of the failure. The failure mileage was approximately 147,000.

VISIBILITY/WIPER

Issue Description: Melting Dashboard Creating Driving Hazard I am reporting a serious safety hazard involving my 2008 Toyota Camry, which has developed a melting/sticky dashboard condition that significantly affects driver visibility and safety during daylight driving. Nature of the Problem: •The dashboard has become soft, shiny, and sticky to the touch, especially in warmer temperatures. •The melting material creates a high-gloss surface, which leads to excessive glare on the windshield. •This reflection severely impairs forward visibility, especially under sunlight or direct light conditions, such as during midday driving or on sunny days. •The dashboard’s condition is progressively worsening, becoming a constant distraction and hazard when driving. •The condition also poses potential chemical exposure risks, as the degraded dashboard material emits a strong odor and residue. Safety Concerns: •Visual impairment due to reflection: The dashboard acts like a mirror, reflecting sunlight directly into the driver’s line of sight. •Increased accident risk: The glare limits the driver’s ability to clearly see pedestrians, other vehicles, traffic signals, and road signs. •Heat-related degradation: The softening dashboard may also interfere with airbag deployment zones or deteriorate structural safety components over time. Request for Action: I respectfully request the following: 1.That this issue be formally investigated as a safety defect by the relevant vehicle safety authority. 2.That Toyota issue a recall or safety repair program for affected vehicles, if not already done. 3.That an evaluation be conducted to determine if the airbag function is compromised by the dashboard’s current state. Previous Attempts to Resolve: I have attempted to contact Toyota Customer Service and/or local dealerships, but have not received a resolution to date. The problem persists and continues to pose a daily driving hazard.

UNKNOWN OR OTHER

I was recently informed about a previous recall on a dashboard issue I've been dealing with for years. I have a sticky cracking dashboard that imitates a smell in warm to hot temperatures. I have own this vehicle since 2014 and lived at the same address since 2006. Never have I been made aware of the recalls on this issue. I have vested a lot of money to keep this great car on great condition. And it would be good to receive consideration to have the problem dashboard replaced. The sticky dashboard also produces a glare on the windshield causing a blinding most of the time This makes driving challenging unless it's covered. I would really appreciate consideration on extending this recall for the safety of all those on the road ways. Please and Thank you!

STRUCTURE

The contact owns a 2008 Toyota Solara. The contact stated that upon inspection, the interior dashboard was sticky and had started to deteriorate. The vehicle was taken to a local dealer, and the failure was linked to an undisclosed recall; however, the recall repair had expired. The vehicle was not repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 75,731.

UNKNOWN OR OTHER

We took ownership of the vehicle in March 2025. It wasn’t until then when we finally attempted driving it that I realized the dashboard had begun melting. It is shiny and sticky. The Camry was owned by my wife’s elderly parents. Her father was disabled and had stopped driving the car before passing and her mother has dementia. Neither of them were aware of the dashboard recall program or the warranty extension that ended in 2017. Had her father and mother notified us of the problem we would have had it taken care of under the time limit, but they didn't. They purchased it new and the vehicle was mostly garaged, with only 37,000 miles to date most of which were in the first 2 years they owned it. The melting dashboard creates dangerous glare reflecting onto the windshield making it difficult to see. This poses a significant safety hazard when driving on a sunny day, not only to us but to those driving near us, risking a multi-car accident. We have had several close calls while driving this car. This situation has placed us in a difficult position. I am [XXX] and [XXX], we rely on this vehicle for regular transportation to [XXX] and medical appointments. We live on a fixed income and are unable to afford the cost of dashboard replacement. Given these circumstances and the fact that we only recently became aware of the issue we want Toyota to do the right thing and replace the dashboard as they committed to do. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

Decode a 2008 Toyota Camry VIN

Enter your 17-character VIN to get complete specs, safety equipment details, and production information.

Open VIN Decoder

Other years

All Toyota Camry model years