2004 Toyota Sequoia

2004 Toyota Sequoia 4-DR.

Overall

Not Rated

Front Crash

Not Rated

Side Crash

Not Rated

Rollover

Not Rated

AIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULE

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2010-2016 4Runner, 2003-2006 Tundra, 2003-2013 Corolla, 2009-2010 Corolla Matrix, 2004-2005 RAV4, 2002-2007 Sequoia, 2011-2013 Sienna, 2008-2012 Scion xB, 2008-2009 Lexus IS-F, 2007-2012 Yaris and Lexus ES350, 2010-2017 Lexus GX460, 2002-2010 Lexus SC430, 2006-2012 Lexus IS250 and IS350 and 2010-2015 Lexus IS250C and IS350C vehicles. These vehicles had their driver or passenger frontal air bag inflators previously replaced under a prior recall using inflators of the same design. The inflators may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, temperature and temperature cycling.

Campaign: 19V741000

AIR BAGS:FRONTAL:PASSENGER SIDE:INFLATOR MODULE

Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2002-2005 Lexus SC and Toyota Sequoia, 2003-2005 Toyota Corolla and Tundra, and 2003-2007 Pontiac Vibe vehicles. These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules used as original equipment or replacement equipment. In the event of a crash necessitating deployment of the passenger frontal air bag, these inflators may explode due to propellant degradation.

Campaign: 18V883000

SUSPENSION:FRONT:CONTROL ARM:LOWER BALL JOINT

Tenneco Automotive (DRiV) is recalling certain aftermarket ball joints for 2004-2007 Toyota Sequoia and 2004-2006 Toyota Tundra vehicles, MOOG part number K80521, K80522, NAPA part number NCP2601633, NCP2601634, ACDelco part number 45D2344, and 45D2345. The ball joint housing may have inadequate hardness, causing premature failure.

Campaign: 22E002000

AIR BAGS

Toyota Motor Engineering & Manufacturing (Toyota) notified the agency on May 13, 2015, that they are recalling 2005-2007 Lexus SC, Toyota Corolla, Corolla Matrix, Sequoia, and Pontiac Vibe, and 2005-2006 Toyota Tundra vehicles that were originally sold, or ever registered, in Florida, along the Gulf Coast, Puerto Rico, Hawaii, the U.S. Virgin Islands, Guam, Saipan and American Samoa. On June 16, 2015 Toyota expanded the recall to cover an additional 769,055 vehicles, including certain model year 2002-2004 Lexus SC, Toyota Sequoia, 2003-2004 Toyota Corolla Matrix, Toyota Corolla, Pontiac Vibe, and Toyota Tundra vehicles, as well the vehicles covered by the May 13, 2015 notification in the portions of Georgia, Alabama, Louisiana, Mississippi and Texas that were not previously included. The inflators in the front passenger air bags are susceptible to rupture in the event of a crash necessitating the deployment of the front passenger air bag.

Campaign: 15V286000

AIR BAGS

Toyota Motor Engineering & Manufacturing (Toyota) notified the agency on May 13, 2015 that they are recalling certain model year 2004 Sequoia vehicles manufactured August 18, 2003, to August 19, 2004, and 2003-2004 Tundra vehicles manufactured March 18, 2003, to August 25, 2004. On June 16, 2015, Toyota expanded the recall to include an additional 1,270,468 vehicles, including model year 2002-2003 and 2005-2007 Sequoia, 2005-2006 Tundra, 2003-2007 Corolla, 2003-2007 Corolla Matrix, 2003-2007 Pontiac Vibe and 2002-2007 Lexus SC vehicles. This is to address a safety defect in the passenger side frontal air bag inflator which may produce excessive internal pressure causing the inflator to rupture upon deployment of the air bag. This recall addresses both the passenger side frontal air bags that were originally installed in the vehicles, as well as replacement air bags that may have been installed as replacement service parts. A replacement air bag may have been installed, as one example, if a vehicle had been in a crash necessitating the replacement of the passenger side frontal air bag.

Campaign: 15V285000

EXTERIOR LIGHTING

CERTAIN CK MOTORSPORTS COMBINATION HEADLIGHTS, CLEAR CORNER, BUMPER, AND SIDE MARKER LIGHTS SOLD AS REPLACEMENT LAMPS FOR USE ON THE PASSENGER VEHICLES LISTED ABOVE. SOME COMBINATION LAMPS THAT ARE NOT EQUIPPED WITH AMBER SIDE REFLECTORS FAIL TO CONFORM TO FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 108, LAMPS, REFLECTIVE DEVICES, AND ASSOCIATED EQUIPMENT.

Campaign: 06E049000

SUSPENSION:FRONT:CONTROL ARM:LOWER BALL JOINT

ON CERTAIN TRUCKS AND MINI VANS, DUE TO POSSIBLE IMPROPER FINISHING OF THE FRONT SUSPENSION LOWER BALL JOINT, SOME BALL JOINTS MAY EXPERIENCE AN INCIDENTAL DETERIORATION OF THE INTERNAL LUBRICATION. THIS MAY CAUSE THE BALL JOINT TO WEAR AND LOOSEN PREMATURELY, WHICH COULD RESULT IN INCREASED STEERING EFFORT, REDUCED VEHICLE SELF-CENTERING, AND NOISE IN THE FRONT SUSPENSION.

Campaign: 07V013000

SERVICE BRAKES, HYDRAULIC:FOUNDATION COMPONENTS:MASTER CYLINDER

CERTAIN CARDONE MASTER CYLINDERS WITH PART NUMBERS 10-2925, 10-2987, 10-2987MZA, 10-3083, 11-3015, 11-3042, 11-3044, 11-3045, 11-3047, 11-3064, AND 11-3156, AND WITH DATE CODES LOWER THAN DCA7078 SOLD AS REPLACEMENT EQUIPMENT FOR USE ON THE VEHICLES LISTED ABOVE. THE SEAL ON MASTER CYLINDER CAN FAIL AND LEAK BRAKE FLUID.

Campaign: 07E023000

SUSPENSION:FRONT:CONTROL ARM:LOWER BALL JOINT

ON CERTAIN SPORT UTILITY VEHICLES, DUE TO A MANUFACTURING ISSUE IN THE FRONT SUSPENSION LOWER BALL JOINT, THERE IS A POSSIBILITY THAT THE SURFACE OF THE BALL OF THE JOINT MAY HAVE BEEN SCRATCHED. THE BALL JOINT MAY EVENTUALLY EXPERIENCE EXCESSIVE WEAR AND LOOSENESS, RESULTING IN INCREASED STEERING EFFORT.

Campaign: 05V225000

SUSPENSION,POWER TRAIN

I own a 2004 Toyota Sequoia and have owned it since it was built by Toyota. In 2013 Toyota had a safety recall on the frame for that vehicle because in certain Northern states they are having issues with the frame rotting and braking. I brought my vehicle in May of 2013 and Carlson Toyota in Minnesota inspected. It said that it passed and they installed a corrosion kit. This vehicle has been meticulously cared for over the years and it still looks that way on the exterior and interior. I have always had this vehicle enrolled in a car wash club so it gets washed almost daily in the winter and has for its entire life. But the frame of this vehicle is to the point now where it shouldn't be driven. It is so dangerously, rotted and breaking apart. I had the vehicle in Florida for spring break and while I was driving it there it was making some weird clunking noises. So I took it to a repair shop and the frame repair shop said that the frame was beyond repair and probably should not be driven. But it was my only vehicle and I had no choice but to drive it back to Minnesota. Since then I've had several issues when taking off and stopping with loud clunking noises, but it is my daily vehicle and I believe that Toyota should do something to fix it or replace it.

SUSPENSION,WHEELS,SERVICE BRAKES

Description of the Safety Crash/Informed Incident: Vehicle Information: 2004 Toyota Sequoia (VIN: [XXX]) Incident Date: [XXX] Location: [XXX] Police Agency: California Highway Patrol (Report #:[XXX]) Speed at Incident: Highway speeds (~65 MPH) Description of Defect/Failure: Structural mechanical failure leading to sudden, catastrophic wheel separation at highway speeds. Nine days prior to the incident, on [XXX], the vehicle underwent a comprehensive brake, rotor, and tire rotation service at a certified Toyota dealership (Toyota of Chula Vista, Work Order #[XXX]). While traveling on the interstate, the right rear passenger wheel assembly completely detached from the moving vehicle. As a result, the wheel flew off crossing several traffic lanes, traveling over a jersey wall on the freeway shoulder, landing into a nearby drainage ditch. The vehicle dropped onto the remaining brake/rotor assembly, generating extreme sparks, causing an immediate loss of braking pressure, and creating an imminent threat of a rollover or multi-vehicle fatal collision. Subsequent post-incident inspection on a maintenance lift revealed that all wheel studs on the right rear hub were completely sheared or stripped off. This indicates a severe technician failure to properly torque the wheel lug nuts to factory specifications during reassembly, or an un-diagnosed structural failure of the wheel mounting components following certified dealer service. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

STRUCTURE

The contact owns a 2004 Toyota Sequoia. There was an abnormal rattling sound detected in the front area. The vehicle was shaking. No warning lights were illuminated. The vehicle was taken to an independent mechanic who determined that the frame was completely rusty and unsafe to drive. The vehicle was taken to the local dealer to have the frame checked, and it was determined there was minor rust detected. The vehicle was not repaired. The contact vehicle was taken to another local dealer, Crestmont Toyota Parts · Crestmont Toyota Service, 730 NJ-23 N, Pompton Plains, NJ 07444, who determined there was rust detected but was not repaired. The contact wrote a letter to the manufacturer. The failure mileage was approximately 198,000.

STRUCTURE

Rust! Frame completely rusted, even though the CRC was applied back in 2013.

STRUCTURE

The contact owns a 2004 Toyota Sequoia. The contact stated that while completing an inspection and emissions test on the vehicle, the mechanic informed the contact that there was severe rust on the rear subframe of the vehicle, near the control arm, and several other areas on the subframe. The contact stated that there were several holes on the subframe caused by the extreme rust. The dealer was not contacted. The vehicle was not repaired. The manufacturer was not informed of the failure. The failure mileage was approximately 203,000.

STRUCTURE

See attached document for complaint.

STRUCTURE

See attached document for complaint.

SERVICE BRAKES, HYDRAULIC,TRACTION CONTROL SYSTEM

The contact owns a 2004 Toyota Sequoia. The contact stated while driving at approximately 35 MPH, the brake pedal was depressed and went to the floorboard. The contact stated that the check brakes and a traction control warning lights illuminated. The contact stated that the failure was intermittent at first but had become a recurring failure. When Toyota issued a recall for the braking issue, the contact did not receive notices, so the contact called them and was told it was a few selected 2004 Toyota Sequoia recalled for those who had complained but, it was not broadcasted like that. The contact had taken the vehicle to a local dealer, but the vehicle was not yet diagnosed. The vehicle was not repaired. The contact researched online and related the failure to NHTSA Campaign Number: 07E023000 (Service Brakes, Hydraulic). The manufacturer was informed of the failure. The failure mileage was approximately 143,000.

SUSPENSION,UNKNOWN OR OTHER

Frame is rotting out

STRUCTURE,UNKNOWN OR OTHER

TOYOTA frame is falling apart due to the use of faulty metal to manufacture those frames they ran a limited service campaign to replace some of the frames and they denied many other owners that right please help by telling TOYOTA North America to take care of this very hazardous issue thank you